|Drive:||Yamaha Ultramatic CVT|
Rubber mounted, compact, 847 cc, liquid-cooled, DOHC, 8-valve (4-valves / cyl), inline twin cylinder engine with Yamaha’s Chip Controlled Throttle (YCC-T) provides lots of torque across the rev range with linear throttle response.
compact engine design allows it to be placed in the centre of the chassis allowing a shorter wheelbase for excellent off road capabilities
engine is designed to provide smooth, quiet operation for maximum enjoyment
4-point rubber engine mounts reduce vibration
4-valve, downdraft style combustion chamber with 10.5:1 compression ratio.
4-valve design maximizes flow into & out of combustion chamber
31.5 mm intake & 26.5 mm exhaust valves
stainless steel valves feature an Isonite surface treatment & carburized tips for excellent durability & wear resistance
Lightweight hollow camshafts.
cam profiles are designed to accentuate torque & power throughout the rev range
automatic cam chain tensioner reduces both mechanical engine noise & maintenance
“Cross Plane Concept” 270 degree crankshaft.
design reduces inertia torque while emphasizing linear torque
design has been optimized to achieve strong torque over a broad rpm range
CP Concept offers excellent “drive-ability” and linear throttle response
Lightweight gear driven balancer shaft.
reduces engine vibration for excellent rider / passenger comfort
reduced vibration also improves engine durability
Forged connecting rods feature a “nut less” design.
rods are heat treated for excellent durability
Lightweight, concaved forged aluminum short skirt pistons.
design aids in fast engine response & reduced mechanical vibration
“Liner less” bores with direct nickel ceramic plating sprayed directly on the aluminum block.
design eliminates the need for liners / sleeves & reduces weight
excellent heat dissipation & durability for consistent power delivery
cylinder block is incorporated into the upper engine case to reduce weight
Offset cylinder design.
cylinder is “offset” relative to the crank (toward exhaust side)
offset design reduces the side load (friction) on the pistons during the power stroke for improved power output & excellent fuel economy
Dry sump lubrication system with heat exchanger type oil cooler.
oil tank baffling system prevents oil starvation in rugged /difficult off road environments
dry sump oil system reduces engine height for a lower centre of gravity (no deep design oil pan)
heat exchanger type oil cooler maintains consistent oil temperatures for improved durability
spin-on type oil filter for fast oil changes
Yamaha Chip Control Throttle (YCC-T) system (a.k.a. “fly by wire throttle”).
YCC-T electronically controls the throttle valves for outstanding throttle response
YCC-T provides precise control of intake air volume for a smoother torque curve
“Closed loop” dual 36 mm Mikuni throttle body fuel injection.
system uses a throttle position sensor (TPS) for optimum performance (TPS is linked to the ECU & ignition mapping)
12 hole injectors for optimum fuel atomization
system is “tuned” to provide excellent “drive-ability” & “linear” throttle control
fuel injection benefits include choke-free starting, steady idling during warm up, excellent fuel economy & reduced emissions
Easy access, high mounted, high flow 11.5 litre air box features primary & secondary air filters.
primary filter is a washable foam design, secondary filter is a wet viscous paper filter
no tools, clip-style air box lid for easy access
air box & ducting are designed to reduce intake noise
no tools required air box & duct work drains
Yamaha’s industry leading “Ultramatic” CVT (fully automatic) transmission with reverse & downhill engine braking.
dual range, high – low transmission with reverse. Low range offers more “grunt” for towing or hauling heavy loads or when tackling technical terrain.
CVT automatically selects the optimum transmission ratio, meaning you are always in the right “gear”
Ultramatic design offers controllable, confidence inspiring downhill engine braking
engine braking also reduces brake wear & servicing
Ultramatic design features a special centrifugal clutch which keeps constant tension on the V-belt to reduce belt wear since the belt does not slip as the clutches engage
high mounted belt cooling ducts help prevent water ingestion
V-belt housing has a “no tools required” drain plug
automotive style, gated, 5-postion shifter (high, low, neutral, reverse & park)
Super convenient, servo motor controlled, push button On Command 4WD drive system.
On Command drive system features 3 modes: 2wd, 4wd limited slip & 4wd differential lock
On Command drive system lets you select the best mode for the conditions… not the machine
4wd differential lock provides power to all 4 wheels for maximum traction and “bite”
Hi-low- reverse transmission features helical cut gears.
helical cut gears reduce mechanical noise & provide smooth, easy shifting
transfer case style transmission (separate transfer case bolts to engine)
console mounted, automotive style gated shifter (H-L-N-R)
Heavy duty front & rear drive shafts & new design front & rear gear cases.
single piece front & rear drive shafts
ring & pinion gears use a spiral design to reduce noise
front & rear CV drive shafts feature heavy duty “Peest” rubber boots to protect the CV joints for extended service life & durability
High flow, high efficiency cooling system with recovery tank.
high mounted rad & special rad side covers offer maximum rad protection
7 – blade ring type cooling fan for maximum airflow through the rad
under hood access panel & drain cut-out built into the rad shroud for easy rad cleaning
over heat warning buzzer
Quiet, full stainless steel 2 into 1 exhaust system.
system features a cleanable spark arrestor to prevent stray sparks from exiting the exhaust
3-way catalyzer & oxygen sensor (closed loop fuel injection) help reduce exhaust emissions
stainless steel design helps prevent rusting
Maintenance-free transistor controlled ignition (TCI).
produces a strong spark for fast starts
provides precise ignition timing / mapping for optimum engine performance at all rpms
High performance direct ignition coils (ignition coil is built into the spark plug caps).
reduces weight & complexity
Speed Key (a.k.a.) Valet Key.
limits vehicle top speed to 40 km/hr (25 mph) when Speed Key is on
under hood key operated system (key is removable to prevent tampering)
High output AC magneto.
AC magneto produces 600 watts of power for the vehicle & related optional factory accessories
Rugged, compact, round tube steel frame.
wheelbase is only 35 mm (1.4″) longer than 2 seater Wolverine for exceptional off road capabilities & a tight turning radius
compact design provides nimble, responsive handling & excellent terrain-ability
special frame design positions the rear seats slightly higher than the front seats
frame mounted 2″ hitch receiver (907 kg / 2000 lb towing capacity)
Full length steel under frame skid plates (high impact plastic front plate).
underside of unit is fully protected by rugged steel skid plates with recessed fasteners
oil drain holes & other access holes in skid plates for easy service-ability
skid plates enhances terrain ability by allowing unit to slide more easily over obstacles
ROPS roll over protection structure (ANSI / ROHVA-1-2011 standard).
Speed sensitive, rack & pinion-type, Electric Power Steering (EPS).
significantly reduces steering effort resulting in less rider fatigue & improved rider comfort
speed sensitive system; more assist at slow speeds, less assist at higher speeds for optimum control
significantly reduces trail feedback through the steering wheel when a wheel strikes an obstacle
fully sealed EPS system (electrics & gears) with marine grade connectors
Adjustable, independent double wishbone front suspension with front stabilizer bar.
KYB oil & nitrogen gas shock with 5-position cam-style preload adjuster & colour matched springs
246 mm (9.7″) of front wheel travel
front stabilizer bar controls / limits body roll for added confidence & comfort
Dual “Wide Arc” style front A-arms.
“Wide Arc” design increases ground clearance in the centre of the machine
273 mm (10.7″) of ground clearance
heavy duty plastic CV boot guards
Adjustable, independent double wishbone rear suspension with rear stabilizer bar & self leveling rear shocks.
Sachs self leveling “Nivomat” nitrogen charged shocks with dual rate, colour matched springs
self leveling shocks help provide consistent ride comfort & maintains wheel travel even when the unit is loaded (people & cargo)
stabilizer bar controls / limits body roll for added rider confidence & comfort
221mm (8.7″) of rear wheel travel
rugged plastic CV & CV boot guards
Four-wheel hydraulic disc brakes.
dual 207 mm (8.1″) front rotors squeezed by twin piston calipers
dual 207 mm (8.1″) rear rotors squeezed by twin piston calipers
rear drive shaft mounted 200 mm disc style parking brake with centre console mounted automotive style parking brake lever
High-Performance 26″ MAXXIS tires & aluminum die cast mag wheels.
tire design enhances steering precision, ride comfort, ground clearance & traction
rugged die cast aluminum wheels
35 litre fuel tank.
low fuel warning indicator light in multi-function meter
Evap control system helps to prevent raw fuel vapours from entering the atmosphere
Easy to read, fully digital LCD multi-function meter assembly.
functions include: speedometer, odometer, dual trip meters, fuel gauge, hour meter, clock, voltage display, On Command mode status, transmission gear indicator, Speed Key mode & various warning lights including low battery, temperature warning & more
Automotive style dashboard.
dashboard includes: On-Command switch, ignition switch, 12 volt DC outlet ( 10A / 120W); glovebox & blank accessory plugs for additional accessories
rear seating area also has 12 volt DC outlet (10A / 120W)
Adjustable tilt steering wheel & driver’s seat.
12 degrees of tilt steering wheel adjustability (no tools req’d)
infinite adjustability within the 12 degrees of movement
quick adjust driver’s seat provides 100 mm (3.9″) of movement with 8 pre-set positions of fore-aft adjustability (no tools required)
high grip, textured front & rear floor surface
Roomy 4-person seating with 3-point seat belts & passenger hand holds.
contoured high back bucket seats (4) provide all day riding comfort
stadium style rear seats are 100 mm (3.9″) higher than front seats for excellent passenger sightlines
quick adjust driver’s seat provides 100 mm (3.9″) or 8 pre-set positions of fore-aft movement (no tools required)
high grip, textured front & rear floor surface
adjustable front passenger hand hold & rear passenger hand holds (non-adjustable) for additional passenger security, confidence & comfort
easy to adjust, 3-point seat belts for all
dashboard mounted seat belt & helmet reminder / warning lights
Colour matched, roto-molded, plastic doors & special shoulder bolsters.
doors provide added security & comfort for driver & passengers
doors helps reduce mud & water splash from entering the cockpit
shoulder bolsters help ensure driver & passengers stay inside the vehicle in the event of a roll over
Centre console storage & drink holders.
centre console storage compartment (under centre console arm rest)
glove box storage compartment
dual centre console mounted drink holders
4-rear console drink holders
Super versatile, polyethylene, convertible cargo bed.
2 sizes of cargo bed are available depending on seating arrangement
with 4 seats in place the cargo bed measures 220 mm (8.7″) L x 1100 mm (43.3″) W X 330 mm (13″) H & can hold 71 kg (158 lb) of cargo
folding down the convertible rear seats (leaving 2 front seats only) the cargo bed measures 900 mm (35.4″) L x 850 mm (33.5″) W X 300 mm (11.8″) H & can hold 272 kg (600 lbs.)
rear seats can be folded without the use of tools
8 steel tie down points in the full size bed; 4 points in the smaller bed configuration
single lever tailgate opener
Note: regardless of configuration cargo bed does not dump
dual LED headlights
dual LED tail lights with brake light function
Heavy duty, 2″ receiver style trailer hitch mount.
towing capacity is 907 kg (2,000 lbs.)
maximum torque weight is 50 kg (110 lb)
Aggressive styling with front & rear over fenders.
injection-molded body components resist damage
slant low nose design provides excellent visibility of the terrain ahead
stylish front & rear over fenders reduce splash
Low maintenance, sealed battery (battery should be charged during extended storage).
convenient under hood location for protection & accessibility
All Wolverine X4s have been designed with accessory installation / integration in mind.
sun top / roof (HDPE – high density polyethylene) mounts
cab enclosure (windshield, washer fluid, windshield wipers, dome light, etc.) mounts
2nd battery kit ready
single lever tailgate with dual lanyards to support the gate when open
marine grade waterproof connectors throughout the vehicle
front & rear floor drains with rubber drain covers
dual 12 volt DC outlets (10A / 125 watt each) in front & rear seating areas
under hood Yamaha diagnostic tool connector (YDT tool performs many functions & saves time & money when diagnosing issues. YDT can also store service history too)
Captain's Village Marina has been providing the highest quality service to our customers for over 40 years. We offer a cutting edge line-up of boats for sale, friendly and competent staff and full marina facilities.